Você está aqui : Início>Produtos>Aço revestido metálico>Aço aluminizado

https://tj.zzsteel.net/upload/product/1594262915226375.jpg
https://tj.zzsteel.net/upload/product/1594262916271686.jpg
https://tj.zzsteel.net/upload/product/1594262916239740.jpg

Bobina de aço aluminizado


Lugar de origem: China
Marca: ZHANZHI
Número modelo: ZZ AC-1
Certificação: ISO9001


inquérito
Detalhe

Descrição:

Hot-dip aluminum coated steel sheet combines the mechanical properties of cold-rolled steel sheet with aluminum’s high resistance retention, heat reflection, and superior rust resistance.

>>Heat resistance: Lengthy exposure to temperatures up to 450 degrees Celsius causes very little change in ALCOAT and does not affect its attractive surface brightness, compared to galvanized steel sheet and cold-rolled steel sheet.

>>Heat Reflectivity: Elegant surface of ALCOAT reflects about 80% of the heat at a temperature of 450 degrees Celsius. Its reflection rate goes up to 95% where infrared rays are present. This makes ALCOAT the ideal choice for producing the heat reflector plates in toasters, ovens, gas ranges and oil stoves.

>>Corrosion resistance: Aluminum tends to be more resistive than Mn, Mo, Cr, W, Cd, Fe, Zn. But because the aluminum oxide film itself has good stability, so the surface corrosion resistance in addition to part of the environmental conditions, much better than galvanized sheet.

>>Green environmental performance: It's not harmful to human body, is an environmental protection product, aluminum plating plate can be fully recycled

>>Processing performance: Aluminized steel plates can be processed in the same way as other steel plates

>>Weldability: Because aluminum is soft, it is easy to bond, and because of its strong electrical conductivity, the welded part has excellent heat dissipation. In addition, because the coating is higher than the galvanized melting point, it is not easy to flow, and the melting area is small, so it is not necessary to use galvanized steel plate as high current

>>Surface appearance: It has a long-lasting shine, better corrosion resistance and weathering resistance.

1)Product name: hot dip aluminum coated coil, aluminum silicon alloy coated steel coil, aluminized steel coil

2) Grade: CS TYPE A, CS TYPE B, CS TYPE C, FS, DDS, Grade 230, Grade 255, Grade 275, Grade 550, etc.

3) Standard: ASTM a463

4) Espessura: 0.25-0.8 mm

5) Width: from 800mm to 1250mm, all available

6) Coil ID: 508mm/610mm

7) Coil weight: from 3-8MT, according to the customer's request

8) AS coating: 12-25 μm

9) Post-treatment type:Oiled, Non treatment

10)Technology: Hot Dipped

Aplicações:

1)Automotive components : muffler, exhaust pipe, fuel tank

2)Appliances : Electric stove, gas range, bread machine, toaster, frying pan, dryer, air conditioner, heat exchanger, stovepipe, pre-heater, dryer, duct, boiler, gas oven, rice cooker.

3)Construction : Walls and roofs of chemical factories, fireproof walls

Especificações:

Coating Layers of hot dip aluminium coated steel:

parâmetros
Lugar de origem: China
Marca: ZHANZHI
Número modelo: ZZ AC-1
Certificação: ISO9001
Quantidade mínima: Toneladas 25
Preço: $ 700-800
Detalhes da embalagem: Pacote marítimo padrão ou conforme solicitação do cliente
Tempo de entrega: 15 ~ 35 dias após o recebimento de L / C ou depósito
Condições de pagamento: T / T, L / C
Habilidade da fonte: Toneladas 10,000



Centre em contato conosco

produto relacionado