Pont en treillis en acier pour la construction

1. introduction du produit:

Acier truss with steel rebar as the upper chord, lower chord and web member and connected by resistance spot welding is called steel rebar truss. The composite bearing plate, in which the steel truss and the bottom plate are connected into a whole by resistance spot welding, is called the steel truss pont. 

2.Caractéristiques

1) Matériel:

Upper rebar and lower rebar: HRB400E, CRB550

web rebar: Cold rolled bright steel round bars

Bottom membrane plate: According to different applications, galvanized steel sheet or cold rolled steel sheet can be used, the thickness is usually 0.5-0.6mm, and the zinc layer is 120g on both sides.

2) Taille:

3)Surface treatment: galvanized

4) Emballage: emballage standard digne de la mer 

3.Application :

The applicable scope of reinforced truss floor slab is applicable to both steel structure and concrete structure. First of all, because of the large amount of steel bars, the steel truss bears a large unsupported span. Therefore, for buildings with a span of more than 4.5 meters, it is beneficial to choose the steel truss floor slab, because it can make a large unsupported span. Thirdly, because there are many steel bars, which can bear great late load, the steel truss floor slab is more suitable for buildings with late load capacity above 1.5 tons. Also, it is quite suitable for industrial plants with low floors. This can avoid the drawback that steel truss floor slabs occupy a large number of cranes in high-rise buildings. 

4.Avantage:

Steel deck realizes mechanized production, which is beneficial to uniform arrangement and spacing of steel rebar and uniform thickness of concrete protective layer, and improves the construction quality of floor slab. Assembled steel truss pont can significantly reduce the amount of steel binding on site, speed up the construction progress, increase the construction safety guarantee and realize civilized construction. Assembled templates and connectors are convenient to disassemble and assemble, can be reused for many times, saves steel, and meets the requirements of energy conservation and environmental protection. But also greatly improves the labor productivity and effectively reduces the product cost.