Estás aquí : Inicio>Productos>Varilla de acero y alambrón>Barras de acero y procesamiento

https://tj.zzsteel.net/upload/product/1620702453349318.png
https://tj.zzsteel.net/upload/product/1620702456709227.png
https://tj.zzsteel.net/upload/product/1620702455981085.png

Cubierta de armadura de acero para construcción


Lugar de origen:

China

Marca:

ZHANZHI

Número de modelo:

ZZ RB-1

Certificaciones:

ISO9001


Consulta
Detalle

1.Introducción del producto:

Acero truss with steel rebar as the upper chord, lower chord and web member and connected by resistance spot welding is called steel rebar truss. The composite bearing plate, in which the steel truss and the bottom plate are connected into a whole by resistance spot welding, is called the steel truss cubierta. 

2.Especificaciones

1) material:

Upper rebar and lower rebar: HRB400E, CRB550

web rebar: Cold rolled bright steel round bars

Bottom membrane plate: According to different applications, galvanized steel sheet or cold rolled steel sheet can be used, the thickness is usually 0.5-0.6mm, and the zinc layer is 120g on both sides.

2) tamaño:

The diameter of upper rebar

6-12mm

El diámetro de inferior barra de refuerzo

6-12mm

El diámetro de web barra de refuerzo

4-6mm

The height of the truss

70-270mm

El diámetro de la horizontal support rebar

8, 10 mm

The diameter of the Vertical support rebar

HPB235

12(for h150); 14(for h>150).

HRB335, HRB400

10(for h150); 12(for h>150).

3)Surface treatment: galvanized

4) Embalaje: embalaje estándar marinero 

3.Aplicación:

The applicable scope of reinforced truss floor slab is applicable to both steel structure and concrete structure. First of all, because of the large amount of steel bars, the steel truss bears a large unsupported span. Therefore, for buildings with a span of more than 4.5 meters, it is beneficial to choose the steel truss floor slab, because it can make a large unsupported span. Thirdly, because there are many steel bars, which can bear great late load, the steel truss floor slab is more suitable for buildings with late load capacity above 1.5 tons. Also, it is quite suitable for industrial plants with low floors. This can avoid the drawback that steel truss floor slabs occupy a large number of cranes in high-rise buildings. 

4.Ventaja:

Steel deck realizes mechanized production, which is beneficial to uniform arrangement and spacing of steel rebar and uniform thickness of concrete protective layer, and improves the construction quality of floor slab. Assembled steel truss cubierta can significantly reduce the amount of steel binding on site, speed up the construction progress, increase the construction safety guarantee and realize civilized construction. Assembled templates and connectors are convenient to disassemble and assemble, can be reused for many times, saves steel, and meets the requirements of energy conservation and environmental protection. But also greatly improves the labor productivity and effectively reduces the product cost.

parámetros

Lugar de origen:

China

Marca:

ZHANZHI

Número de modelo:

ZZ STD-1

Certificaciones:

ISO9001

Cantidad mínima de pedido:

PC 1000

Precio:

$ 7-10

Detalles del empaque:

Paquete marinero estándar o según la solicitud del cliente

Tiempo de entrega:

15 ~ 35 días después de la recepción de L / C o depósito

Condiciones de pago:

T / T, L / C

Capacidad de la fuente:

Toneladas 10,000


Ccontáctenos